For granit
Pressurized water tanks
For granite
For concrete
For marble
For floor
Manual tile cutters
Tables for working with large format materials
Tile Leveling Systems
Trowels and floats
Vacuum suction cup
For marble
Systems for lifting, handling and laying large format material
300 mm Distar Marble Diamond Disc
€48,16
The DISTAR MARBLE diamond disc with a diameter of 300 mm is designed for cutting natural materials.
Designed for wet cutting (water cooling).
Ideal for cutting all types of marble, travertine, dolomite and other soft materials.
Hole: 32 mm ( could use with additional ring 25.4 mm)
Additional information
Related products
125 mm Diamond disc Distar Duplex
DISTAR GRANITE
The DISTAR GRANITE diamond disc used for processing granite of all types and materials from dense sandstone. When working, it is able to provide the highest possible performance, while having a sufficiently high resource. A good advantage of the tool is the perfect clean cut when machining materials with a wet method.
It is used on machines and tile cutters of any model that have a seat from 22.23 to 32 mm, and allow the use of circles with a diameter of 115 to 400 millimeters.
It has a sufficiently long service life, which reaches 700 running meters (for a diameter of 200 mm), at the same time, the processing speed is up to 1.2 running meters. meters per minute. It is positioned on the market as one of the most powerful disks, while working with such a tool allows you to minimize the specific processing costs. Thus, the use of this tool becomes the most profitable in comparison with analogues.
It is used on machines and tile cutters of any model that have a seat from 22.23 to 32 mm, and allow the use of circles with a diameter of 115 to 400 millimeters.
It has a sufficiently long service life, which reaches 700 running meters (for a diameter of 200 mm), at the same time, the processing speed is up to 1.2 running meters. meters per minute. It is positioned on the market as one of the most powerful disks, while working with such a tool allows you to minimize the specific processing costs. Thus, the use of this tool becomes the most profitable in comparison with analogues.
Distar Gres Ultra
The Distar Gress ultra diamond disc is mostly used for medium-sized work with wall and floor tiles, as well as with porcelain stoneware. Due to its processing speed, it reduces unit costs, making it a necessary and profitable tool.
Among the advantages of the disc, one can note a high cutting speed of 1.3 meters with a sufficiently large resource of 900 linear meters. It is used in combination with standard tile cutters with a minimum power of 0.8 kW and a rotation speed of up to 2900 rpm. In this case, a water supply is required during operation, 6 l / min.
Since the disc is high-speed, the turbocharged layer can leave some chips on the processed edge, for this reason, it is usually used for cutting when the joints of the tiles are covered with molding or decorative profiles. Application: ceramic floor tiles, porcelain stoneware, marble (all types) Advantages: high cutting speed of hard porcelain stoneware.
Among the advantages of the disc, one can note a high cutting speed of 1.3 meters with a sufficiently large resource of 900 linear meters. It is used in combination with standard tile cutters with a minimum power of 0.8 kW and a rotation speed of up to 2900 rpm. In this case, a water supply is required during operation, 6 l / min.
Since the disc is high-speed, the turbocharged layer can leave some chips on the processed edge, for this reason, it is usually used for cutting when the joints of the tiles are covered with molding or decorative profiles. Application: ceramic floor tiles, porcelain stoneware, marble (all types) Advantages: high cutting speed of hard porcelain stoneware.
125 mm Diamond Disc Distar Gres Master
It couldn't be faster.
Every year new types of ceramic granite tiles with increased frost resistance and abrasion appear. Increasingly, porcelain stoneware with a thickness of 14, 20 mm is used. Such materials are very difficult to cut with conventional diamond discs. Combustion occurs, disc deformation, stop in the cut.
The Gres Master disc is designed for just such difficult conditions. The involute turbocharged grooves of the diamond layer are effectively embedded in the durable material, cooling the cutting zone. The disc sinks gently into even the thickest porcelain stoneware.
This high performance makes it the fastest drive in the Distar range. The disc will also cut normal porcelain tiles, but at a very high speed. The quality of the edging is inferior to disc Esthete and Decor Slim, but very often such cleanliness is not required, especially where the tile joint is closed by molding.
https://youtu.be/1KiNtvTbU2Y
Diamond Disc Distar Hard Ceramics
Diamond Disc Distar Hard Ceramics is designed for high-quality cutting of ceramic tiles with and without decorative coating, as well as porcelain stoneware. The cutting speed per minute is 1.1 linear meters, with a resource of 1000 running meters. m, due to its resource for material processing, profitable operation of the tool is achieved at lower costs.
Mostly it is used to work with relief glaze, wall and floor ceramics, porcelain stoneware, as well as all types of granite and marble in rare cases. It has a wide range of disc diameters from 115 mm to 400 mm, which is used on tile cutters with a power of 0.8 -1.5 kW at a speed of 2900 rpm. For diameters 200-250 mm and 2-2.5 kW for 300-400 mm. In this case, water supply is required in an amount of 5 liters per minute of work. process. With other indicators, performance changes significantly. Hard Ceramics can be purchased at an affordable price for fast, clean performance.
Mostly it is used to work with relief glaze, wall and floor ceramics, porcelain stoneware, as well as all types of granite and marble in rare cases. It has a wide range of disc diameters from 115 mm to 400 mm, which is used on tile cutters with a power of 0.8 -1.5 kW at a speed of 2900 rpm. For diameters 200-250 mm and 2-2.5 kW for 300-400 mm. In this case, water supply is required in an amount of 5 liters per minute of work. process. With other indicators, performance changes significantly. Hard Ceramics can be purchased at an affordable price for fast, clean performance.
