350 mm Distar Marble Diamond Disc
€63,89
The DISTAR MARBLE diamond disc with a diameter of 350 mm is designed for cutting natural materials.
Designed for wet cutting (water cooling).
Ideal for cutting all types of marble, travertine, dolomite and other soft materials.
Hole: 32 mm ( could use with additional ring 25.4 mm)
Categories: Diamond Blades, For marble, For sandstone
Additional information
Related products
Diamond Blade Distar Edge
€74,29 – €96,44
All craftsmen are faced with disc drift when cutting the edges of the tiles at 45 degrees. This is due to the non-rigidity of the diamond disc bodies and their insufficient cutting ability. The likelihood of slipping increases when cutting solid or thick porcelain stoneware.
The Edge Diamond Blade addresses these issues. It is designed for cutting ceramics at 45 degrees. Thickness 1.4 mm
The thickened hub makes the housing rigid, preventing the disc from slipping to the side.A wide diamond layer reinforces the system. Its “sandwich” structure contains a large diamond in the center and a small one at the edges. This solution ensures high cutting performance and fine edge regrinding at the same time.
This innovative product will make the complexities of 45 degree beveling a thing of the past.Works effectively with ceramic tiles and porcelain stoneware. It is used on tile cutters with water-cooling.
https://youtu.be/1JJ9eqODK9E
The thickened hub makes the housing rigid, preventing the disc from slipping to the side.A wide diamond layer reinforces the system. Its “sandwich” structure contains a large diamond in the center and a small one at the edges. This solution ensures high cutting performance and fine edge regrinding at the same time.
This innovative product will make the complexities of 45 degree beveling a thing of the past.Works effectively with ceramic tiles and porcelain stoneware. It is used on tile cutters with water-cooling.
https://youtu.be/1JJ9eqODK9E
230 mm Diamond Disc Distar Metheor H15 for medium and high reinforced concrete
€70,18
The Distar Meteor H15 diamond disc is used as the main consumable tool when cutting medium to high grade reinforced concrete. Shows high working speed, productivity and resource when working even with heavy, highly reinforced concrete. In particular, when working on a gas saw, it reaches a working speed of up to 2 meters per minute.
Due to the increased height of diamond segments up to 15 mm, the resource reaches 700 linear meters. In the case of a floor saw, the resource reaches 800 meters at a speed of up to 2.75 running meters / min. (data are presented for reinforced concrete M450 with 5 reinforcing bars in a meter with a diameter of 12 mm). It is used in combination with floor saws and medium power gas cutters (from 5 to 13 kW).
Due to the increased height of diamond segments up to 15 mm, the resource reaches 700 linear meters. In the case of a floor saw, the resource reaches 800 meters at a speed of up to 2.75 running meters / min. (data are presented for reinforced concrete M450 with 5 reinforcing bars in a meter with a diameter of 12 mm). It is used in combination with floor saws and medium power gas cutters (from 5 to 13 kW).
300 mm Diamond Disc For Concrete Baumesser Beton Pro
€54,45
Diameter 300 mm.
The Baumesser Beton PRO diamond cutting disc is a universal disc for working with all types of concrete.
It is should be noted that its use is acceptable when working with non-reinforced and reinforced concrete of any type. In general, the tool is versatile in use and can be used for cutting various building materials.
The disc provides the most stable and high-quality work and has a large resource and productivity at the same time.
Baumesser Beton PRO is designed for use on power cutters and flat saws with a hole of 25.4 mm.
Diamond Disc Distar Bestseller Ceramics
€15,31 – €26,62
Diamond disc DISTAR BESTSELLER CERAMICS is used by professional builders on grinders for dry cutting and is, in turn, the optimal solution when working with wall tiles, as well as with any other. With it, you can perform a soft and at the same time stable cutting of material.
This diamond disc can work perfectly without the need for cooling. It has a long service life, with a cutting speed of about 0.8 meters per minute, and a cutting width of 1.5 and 2.2 mm, depending on the choice of a diamond disc, since it is presented in two variations of 125 and 230 mm. The quality of the edging has earned two stars out of five, but this is enough to carry out high-quality cutting of wall and floor tiles.
Anyone can buy a diamond disc, since it has a low and affordable price for everyone.
This diamond disc can work perfectly without the need for cooling. It has a long service life, with a cutting speed of about 0.8 meters per minute, and a cutting width of 1.5 and 2.2 mm, depending on the choice of a diamond disc, since it is presented in two variations of 125 and 230 mm. The quality of the edging has earned two stars out of five, but this is enough to carry out high-quality cutting of wall and floor tiles.
Anyone can buy a diamond disc, since it has a low and affordable price for everyone.
TESSPAVER 120 S
€845,79
With the TESSPAVER 120S slab lifter you can easily lay and transport slabs. Picking up slabs in an existing terrace or tile path is also possible.
Innovative Dutch design
Lay slabs seamlessly till 120 cm
To pick up multiple slabs at the same time
The lever is adjustable in height
Max. burden 150 kg
Has puncture proof tyres anti-puncture tires
MORE SQUARE METERS IN LESS TIME Work super fast: Pick up, transport and lay with one device. With the TESSPAVER you can lay, transport and remove large, heavy tiles and slabs. You can supply multiple tiles at the same time. You can grab a stack of tiles, transport them and lay the tiles one at the time seamlessly. The slab handling device has an adjustable blade. This makes it possible to pick up, transport and to lay tiles seamlessly (thickness 3 to 8 cm).
GRABRANGE OF 30 CM TO 120 CM The TESSPAVER 120s has a clamping range of 30 cm to 120 cm in increments of 2,5 cm. The height of the clamps allwos the transport of a stack of tile at once (up to 25 cm height). You can transport L-elements, U-elements and concrete steps. Maximum burden 150 kg.
MORE SQUARE METERS IN LESS TIME Work super fast: Pick up, transport and lay with one device. With the TESSPAVER you can lay, transport and remove large, heavy tiles and slabs. You can supply multiple tiles at the same time. You can grab a stack of tiles, transport them and lay the tiles one at the time seamlessly. The slab handling device has an adjustable blade. This makes it possible to pick up, transport and to lay tiles seamlessly (thickness 3 to 8 cm).
GRABRANGE OF 30 CM TO 120 CM The TESSPAVER 120s has a clamping range of 30 cm to 120 cm in increments of 2,5 cm. The height of the clamps allwos the transport of a stack of tile at once (up to 25 cm height). You can transport L-elements, U-elements and concrete steps. Maximum burden 150 kg.
125 мм Diamond Blade Baumesser Beton Pro
€7,26