For granit
Pressurized water tanks
For granite
For concrete
For marble
For floor
Manual tile cutters
Tables for working with large format materials
Tile Leveling Systems
Trowels and floats
Vacuum suction cup
For marble
Systems for lifting, handling and laying large format material| Brand |
|---|
Water pump for Wandeli and Shijing
€42,35
24 V water pump, suitable for Wandeli and Shijing tile cutters.
Has a set of interchangeable filters.
It has a protection that shuts off the motor when there is no more water left in the tank to be pumped.
Additional information
You may also like…
Automatic Tile cutter Wandeli QXZ-ZD-1200 EU LED
NEW VERSION!!!
• Integrated LED table lighting.
Now it is easier and more convenient to carry out work on objects where there is no lighting.
• Automatic water start with engine start.
You no longer need to connect the water supply and the motor separately. Work is now more convenient and faster!
• New generation water pump with integrated water flow and additional filters to protect the engine.
https://youtu.be/kcyCxVDFaEE
WORLDWIDE DELIVERY SERVICE !!!
→→→ SEND US YOUR REQUEST AND WE FIND BEST PRICE FOR DELIVERY TO YOUR ADDRESS !!!https://youtu.be/kcyCxVDFaEE
Automatic tile cutter SHIJING SJ-ZD 1800
Automatic tile cutter SHIJING SJ-ZD 1800 is designed for cutting tiles, granite and stone products up to 1805 mm long and up to 28 mm thick.
Automatic variable speed motor feed provides a more uniform cut and reduces tile edge chipping. It is convenient in that hands can be used to press uneven tiles or other work during cutting.
The powerful 2300 W motor at 13,000 rpm cuts very cleanly and quickly.
Diamond blades are used for cutting tiles with a small diameter of 115-120 mm, which hold the cut line very well and do not bend when cutting, which is especially important when cutting tiles at an angle of 45 degrees.
Water pump with adjustable water supply and additional filters to protect the engine.
The table weighs only 57 kg, which is about 50 percent lighter than other machines, making it easy to carry and load into the car.
Robust profiled aluminum housing
Tile cutting diagonal: 1270 mm
Adjustable cutting angle 0-45°
There are castors that gives the car mobility.
Possibility of cutting according to the template (overcutting)
Side supports and tile brackets (included)
A retractable tabletop is also attached to the supports, which can be adjusted as needed.
Table stops allow you to cut tiles in a single pattern (this speeds up the process of cutting many tiles at an angle)
An important advantage is that water and dirt do not accumulate under the table - they always flow into the bucket under the table, which allows you to quickly and easily clean the table and transport it during work.
Numerous control options for faster and easier work
Electrical cables are nicely hidden and do not protrude beyond the cutting table
Powerful motor and high cutting speed
Raised motor that allows you to adjust the depth of cut, as well as make cuts in the middle of the tile.
Laser meter sold separately
https://youtu.be/j-z92o3OJNs
https://youtu.be/qWbGJ_vMTAE
https://youtu.be/j-z92o3OJNs
https://youtu.be/qWbGJ_vMTAE
Automatic tile cutter Wandeli QX-ZD 1200 EU
The model is specially adapted for the European market!
New generation water pump with reverse flow water supply and additional filters to protect the engine.
Automatic Wandeli QX-ZD 1200 Advantages:
Automatic supply
Cutting length: 1200 mm
High-speed engine: 12000 rps/min 1500W!
Disc: 115mm - 125 mm (2 pc in a set)
Cutting at an angle, chamfering
Laser marker
The machines have a pump to supply water to a working area
Rapid changing of polluted water
Stops for series and corner cutting
WORLDWIDE DELIVERY SERVICE!!!
→→→ SEND US YOUR REQUEST AND WE FIND BEST PRICE FOR DELIVERY TO YOUR ADDRESSRelated products
230 mm Diamond Disc Distar Metheor H15 for medium and high reinforced concrete
The Distar Meteor H15 diamond disc is used as the main consumable tool when cutting medium to high grade reinforced concrete. Shows high working speed, productivity and resource when working even with heavy, highly reinforced concrete. In particular, when working on a gas saw, it reaches a working speed of up to 2 meters per minute.
Due to the increased height of diamond segments up to 15 mm, the resource reaches 700 linear meters. In the case of a floor saw, the resource reaches 800 meters at a speed of up to 2.75 running meters / min. (data are presented for reinforced concrete M450 with 5 reinforcing bars in a meter with a diameter of 12 mm). It is used in combination with floor saws and medium power gas cutters (from 5 to 13 kW).
Due to the increased height of diamond segments up to 15 mm, the resource reaches 700 linear meters. In the case of a floor saw, the resource reaches 800 meters at a speed of up to 2.75 running meters / min. (data are presented for reinforced concrete M450 with 5 reinforcing bars in a meter with a diameter of 12 mm). It is used in combination with floor saws and medium power gas cutters (from 5 to 13 kW).
DISTAR GRANITE
The DISTAR GRANITE diamond disc used for processing granite of all types and materials from dense sandstone. When working, it is able to provide the highest possible performance, while having a sufficiently high resource. A good advantage of the tool is the perfect clean cut when machining materials with a wet method.
It is used on machines and tile cutters of any model that have a seat from 22.23 to 32 mm, and allow the use of circles with a diameter of 115 to 400 millimeters.
It has a sufficiently long service life, which reaches 700 running meters (for a diameter of 200 mm), at the same time, the processing speed is up to 1.2 running meters. meters per minute. It is positioned on the market as one of the most powerful disks, while working with such a tool allows you to minimize the specific processing costs. Thus, the use of this tool becomes the most profitable in comparison with analogues.
It is used on machines and tile cutters of any model that have a seat from 22.23 to 32 mm, and allow the use of circles with a diameter of 115 to 400 millimeters.
It has a sufficiently long service life, which reaches 700 running meters (for a diameter of 200 mm), at the same time, the processing speed is up to 1.2 running meters. meters per minute. It is positioned on the market as one of the most powerful disks, while working with such a tool allows you to minimize the specific processing costs. Thus, the use of this tool becomes the most profitable in comparison with analogues.
Adapter М16xSDS Plus Magnet 2
TESSPAVER 120 S
With the TESSPAVER 120S slab lifter you can easily lay and transport slabs. Picking up slabs in an existing terrace or tile path is also possible.
Innovative Dutch design
Lay slabs seamlessly till 120 cm
To pick up multiple slabs at the same time
The lever is adjustable in height
Max. burden 150 kg
Has puncture proof tyres anti-puncture tires
MORE SQUARE METERS IN LESS TIME Work super fast: Pick up, transport and lay with one device. With the TESSPAVER you can lay, transport and remove large, heavy tiles and slabs. You can supply multiple tiles at the same time. You can grab a stack of tiles, transport them and lay the tiles one at the time seamlessly. The slab handling device has an adjustable blade. This makes it possible to pick up, transport and to lay tiles seamlessly (thickness 3 to 8 cm).
GRABRANGE OF 30 CM TO 120 CM The TESSPAVER 120s has a clamping range of 30 cm to 120 cm in increments of 2,5 cm. The height of the clamps allwos the transport of a stack of tile at once (up to 25 cm height). You can transport L-elements, U-elements and concrete steps. Maximum burden 150 kg.
MORE SQUARE METERS IN LESS TIME Work super fast: Pick up, transport and lay with one device. With the TESSPAVER you can lay, transport and remove large, heavy tiles and slabs. You can supply multiple tiles at the same time. You can grab a stack of tiles, transport them and lay the tiles one at the time seamlessly. The slab handling device has an adjustable blade. This makes it possible to pick up, transport and to lay tiles seamlessly (thickness 3 to 8 cm).
GRABRANGE OF 30 CM TO 120 CM The TESSPAVER 120s has a clamping range of 30 cm to 120 cm in increments of 2,5 cm. The height of the clamps allwos the transport of a stack of tile at once (up to 25 cm height). You can transport L-elements, U-elements and concrete steps. Maximum burden 150 kg.
Diamond Disc Distar Hard Ceramics
Diamond Disc Distar Hard Ceramics is designed for high-quality cutting of ceramic tiles with and without decorative coating, as well as porcelain stoneware. The cutting speed per minute is 1.1 linear meters, with a resource of 1000 running meters. m, due to its resource for material processing, profitable operation of the tool is achieved at lower costs.
Mostly it is used to work with relief glaze, wall and floor ceramics, porcelain stoneware, as well as all types of granite and marble in rare cases. It has a wide range of disc diameters from 115 mm to 400 mm, which is used on tile cutters with a power of 0.8 -1.5 kW at a speed of 2900 rpm. For diameters 200-250 mm and 2-2.5 kW for 300-400 mm. In this case, water supply is required in an amount of 5 liters per minute of work. process. With other indicators, performance changes significantly. Hard Ceramics can be purchased at an affordable price for fast, clean performance.
Mostly it is used to work with relief glaze, wall and floor ceramics, porcelain stoneware, as well as all types of granite and marble in rare cases. It has a wide range of disc diameters from 115 mm to 400 mm, which is used on tile cutters with a power of 0.8 -1.5 kW at a speed of 2900 rpm. For diameters 200-250 mm and 2-2.5 kW for 300-400 mm. In this case, water supply is required in an amount of 5 liters per minute of work. process. With other indicators, performance changes significantly. Hard Ceramics can be purchased at an affordable price for fast, clean performance.
